Joy-it ACRYLIC CASE Quick Start Manual

Transparent synthetic case for raspberry pi 4b

ACRYLIC CASE

Transparent synthetic case for Raspberry Pi 4B

1. GENERAL INFORMATION

Dear customer,

Thank you for purchasing our product. In the following, we will show you

which things should be noted during the use.

Should you encounter any unexpected problems, do not hesitate to

Table of Contents

Do you have a question about the ACRYLIC CASE and is the answer not in the manual?

Page 1 ACRYLIC CASE Transparent synthetic case for Raspberry Pi 4B 1. GENERAL INFORMATION Dear customer, Thank you for purchasing our product. In the following, we will show you which things should be noted during the use. Should you encounter any unexpected problems, do not hesitate to...
Page 2 2. CONSTRUCTION First, the protective film should be carefully peeled off from both sides. First, glue the feet to the markings on the base plate so that the Raspber- ry Pi cannot slide within the case. The bottom plate has no ventilation holes compared to the lid. Now place your Raspberry Pi on the base plate.
Page 3 Now insert the side parts. Now put the cover on the side parts of the case.
Page 4 Now screw the case together using the screws and the spacers. Your case is now completely assembled.
Page 5 We will send you a parcel stamp with which you can send us your old appliance free of charge. For this possibility, please contact us via e-mail at pickup@joy-it.net or via telephone, then please dial 02845 93 60 -23 Information about Package: Please package your old appliance safe for transport.