Advertisement
Table of Contents
ARMOR CASE "BLOCK ACTIVE"
RB-AlucaseP4+07FAN
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to
contact
us.
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
Advertisement
Table of Contents
Related Manuals for Joy-it ARMOR CASE BLOCK ACTIVE
Summary of Contents for Joy-it ARMOR CASE BLOCK ACTIVE
- Page 1 1. GENERAL INFORMATION Dear customer, Thank you for purchasing our product. In the following, we will show you which things should be noted during the use. Should you encounter any unexpected problems, do not hesitate to contact www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
- Page 2 Now, screw tight the cooling fans with the screws with the narrow head with the help of the allen key included in the scope of delivery. Put the top of the case onto the Raspberry Pi 4. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
- Page 3 Connect the cooling fans with the Raspberry Pi 4. Please note, that the red cable must be connected with pin 4 (5V) and the black cable with pin 6 (GND). The case is now completely mounted. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
- Page 4 We will send you a parcel stamp with which you can send us your old appliance free of charge. For this possibility, please contact us via e-mail at service@joy-it.net or via telephone. Information about Package: Please package your old appliance safe for transport. Should you not...
Need help?
Do you have a question about the ARMOR CASE BLOCK ACTIVE and is the answer not in the manual?
Questions and answers