Joy-it JT-RD6006-Case01 Manual

Small case for jt-rd6006

SMALL CASE FOR JT-RD6006

JT-RD6006-Case01

1. GENERAL INFORMATION

Dear customer,

Thank you for purchasing our product. In the following, we will show you

which things should be noted during the use.

Should you encounter any unexpected problems, do not hesitate to

www.joy-it.net

Pascalstr. 8 47506 Neukirchen-Vluyn

Table of Contents

Do you have a question about the JT-RD6006-Case01 and is the answer not in the manual?

Page 1 SMALL CASE FOR JT-RD6006 JT-RD6006-Case01 1. GENERAL INFORMATION Dear customer, Thank you for purchasing our product. In the following, we will show you which things should be noted during the use. Should you encounter any unexpected problems, do not hesitate to contact us.
Page 2 The switch will be inserted in the case. The feet will be screwed from below with black screws. The bushes will be unscrewed and from the outside inserted. You have to screw the bush tightly from the inside with one of the earlier removed nuts. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
Page 3 RD6006 into the case. You can affix the last loose cable ends on the module itself namely the current input terminal. There- fore, it is to note that the red cable must be screwed into the + and the black one into the -. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
Page 4 As the last step, you have to put the top onto the case and screw it tight with the silver screws. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
Page 5 We will send you a parcel stamp with which you can send us your old appliance free of charge. For this possibility, please contact us via e-mail at service@joy-it.net or via telephone. Information about Package: Please package your old appliance safe for transport. Should you not...