Download Print this page

Joy-it RB-CASEP4+03B Building Instructions

Magnetic plastic case with dual fan

RB-CASEP4+03B

Building instructionsl

1. GERNERAL INFORMATION

Dear customer,

Thank you for choosing our product. In the following, we will show you what

to consider during commissioning and use.

If you have any problems during use, you are welcome to contact us.

www.joy-it.net

Pascalstr. 8 47506 Neukirchen-Vluyn

Table of Contents

Need help?

Do you have a question about the RB-CASEP4+03B and is the answer not in the manual?

Page 1 RB-CASEP4+03B Building instructionsl 1. GERNERAL INFORMATION Dear customer, Thank you for choosing our product. In the following, we will show you what to consider during commissioning and use. If you have any problems during use, you are welcome to contact us.
Page 2 Now the enclosed heatsinks have to stick to the Raspberry Pi. In addition, the large heat sink on the CPU, the middle of the memory and the small heat sink comes on the USB3.0 control- ler. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
Page 3 The plug need to connect on the Pin 4 and 6. Now the case can be completely closed. All you have to do is place the cover of the case on the middle piece of the case. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
Page 4 Possibility to return in your area: We send you a package brand with which you can return the device to us free of charge. Please contact us by e-mail service@joy-it.net or by phone. Information about the packaging: Please pack your old device safe for transport, you should not have suitable pack- aging material or no own use would like to contact us, we will then send you a suitable one Packaging.