GE Amersham ImageQuant 800 User Manual page 15

Step
6
Start the instrument from sleep
mode
After a set period of inactivity, the instrument enters sleep mode. Tap the touchscreen
to wake the instrument from sleep mode. The Login screen will display. If password
protection has been turned off, the Home screen will display.
Note:
Amersham ImageQuant 800 User Manual 29383813 AA
2.1.2 Start the Amersham ImageQuant 800 control software
Action
Wait for the CCD status to turn green.
Result: Image capturing can begin.
The default time until the instrument enters sleep mode is 30 minutes. To
change this setting, refer to the Amersham ImageQuant 800 Operating
Instructions.
2.1 Amersham ImageQuant 800 control software
2 System Preparation
15