Table of Contents
Advertisement
ARA
Function
Monitor both digital/analog voice signals or monitor digital voice
only
Default
ON
Format
ARA_ {ON/OFF} [CR]
Parameter
ON : Monitor digital voice and Analog voice
OFF : Monitor Digital voice only
Details
Monitor both digital/analog voice signal or monitor digital voice
only
Example
ARA_ON [CR]
ATT
Function
Selects the output level to the radio equipment
Default
ON
Format
ATT_ {ON/OFF} [CR]
Parameter
ON : Lower level
OFF : Higher level
Details
Selects the output level to the radio equipment
Example
ATT_ON [CR]
ATX
Function
Send digital image
Default
None
Format
ATX [CR]
Parameter
None
Details
An image must be captured and stored into memory before it can be
sent.
Example
ATX [CR]
AVT
Function
Activate the Video through function when capturing an image
Default
ON
Format
AVT_ {ON/OFF} [CR]
Parameter
ON : Activate the Video through function
OFF : Deactivate the Video through function
Details
When the AVT command is ON, pressing the TX switch will enable
output of the video signal connected to the Video Input to be passed
to the video output port so that you can monitor the video image.
Press the TX switch again to capture the image and then transmit it
through the radio equipment.
When the AVT command is OFF, pressing the TX switch will
automatically capture the video image and then transmit it through
the radio equipment.
Example
AVT_ON [CR]
28
Advertisement
Table of Contents
