User Id Setting; Tx Channel Setting - AOR ARD9800 Operating Manual

User ID Setting

The ARD9800 provides a function of user ID that allows assigning an own identifying
number. In operation with digital mode, you can assign the ID number for the specified
destination's station along with NETMASK (Group Code) and SQUELCH (DCS)
functions together. This function is only effective in digital mode.

TX Channel Setting

The ARD9800 provides 16 channels (A~F, 0~9). You can assign each channel for ID,
NETMASK and SQUELCH parameters individually. Depending on scene your
communications, you can select the channel number. Take following steps to perform the
channel setting.
1. Connect the supplied PC interface cable between ARD9800 and PC.
2. Set up terminal software on your PC.
3. Select the TX channel [CHAN] where you want to assign the ID, NETMASK
and SQUELCH parameters.
4. In the command prompt of the terminal software, type ACP<CR>.
For example,
cmd>ACP<CR>
CH:A_ID:BBBBB_NM:CCCCC_MD:D
cmd>
<CR>
A
_
BBBBB
CCCCC
D
Carriage Return to confirm the command entry.
Channel number that you selected [CHAN] switch.
Space
Destination ID. You can only assign the number
of 00000 to 99999.
Assign the NETMARK activity. You can only select 0
(=zero) or 1.
1= Activate
0= Deactivate
Note that 1 indicates as F on the terminal software.
Activate or Deactivate Digital Squelch function.
1= Activate
0= Deactivate
17