Table of Contents
Advertisement
ADS
Function
Display current settings
Default
Headerlen : 1.00
AFC = ON
Analog : ON
Format
ADS [CR]
Parameter
None
Details
Displays the current parameter settings
Example
ADS [CR]
AFC
Function
Activate AFC (Automatic Frequency control) function
Default
On
Format
AFC {ON/OFF} [CR]
Parameter
ON: Activates the AFC function
OFF: Deactivates the AFC function
Details
Must be set to ON for the SSB mode
Set to OFF for the FM mode
Example
AFC_ON [CR]
AHL
Function
Set the duration of the synchronization header
Default
100 (1 second)
Format
AHL {050 – 198} [CR]
Parameter
050 – 198 (0.02 incremental)
Details
Sets the duration of the synchronization header
{100} represents 1.00 second.
Example
AFC_146 [CR]
ALF
Function
Add the LF (Line Feed) code at the end of the CR code
Default
ON
Format
ALF {ON/OFF} [CR]
Parameter
ON : Add the LF code at the end of the CR code
OFF : The LF will not be added to the end of the CR code
Details
When this command is set to ON, it facilitates the entry of new data
from the transmit terminal, as a new line is automatically started
(and the previous line is automatically sent).
Example
ALF_ON [CR]
Set duration to 1.46 seconds.
27
Advertisement
Table of Contents
