Table of Contents
Advertisement
Command details
AAQ
Function
Default
Format
Parameter
Details
Example
ACO
Function
Default
Format
Parameter
Details
Example
Send VIDEO In signal to VIDEO OUT port (to the monitor screen)
Capture image into memory of the ARD9800
None
AAQ {0 / 1} [CR]
1: Send VIDEO In signal to a VIDEO OUT (to the monitor screen)
0: Capture image into memory of the ARD9800
While AVT command is OFF, [AAQ 0] will be accepted.
Entering AAQ[CR] will respond with the current status.
AAQ ON
--- Video signal is passed to the VIDEO OUT port
AAQ OFF ---- Video signal is not passed to VIDEO OUT port
AAQ_0 [CR]
Change from the Command mode to the Converse mode
None
ACO [CR]
None
Change from the Command mode (while cmd> appears on the PC
screen) into the Converse mode.
In the Converse mode, data from the PC keyboard can be sent.
To return to the Command mode, enter [Ctrl – C] (holding the
Control key while entering the C.)
ACO [CR]
25
Advertisement
Table of Contents
