Table of Contents
Advertisement
Command Format
Run a terminal software program, and then turn on the power to the
ARD9800. The following message should appear on the PC screen:
cmd>
This indicates the ARD9800 is ready to accept commands from the PC.
Each command consists of three (3) alphabetical characters.
cmd>CCC_NN [CR]
CCC: Command (Must be a capital letter)
_:
Space
NN:
Parameter
[CR]: Carriage Return
Entering a command without a parameter will display the current parameter
(value) setting.
cmd>CCC[CR]
If an invalid parameter or command is entered, the ARD9800 will respond as
follows:
cmd>
?
cmd>
23
Advertisement
Table of Contents
