Stream - Eneo IER-38R160005A User Manual

4.5.2

Stream

To set the image resolution when event occurs across channels or general recording is in process.
Stream > Main Stream
To set the image quality and resolution of Main Stream
No.
1
2
Bitrate(Kbps)
3
4
5
6
Copy Stream
7
User Manual
Figure 4-39 RECORD > Stream > Main Stream
Table 4-40 RECORD > Stream > Main Stream Item and Description
Name
CH Display channels.
Resolution
Framerate Show camera main stream setup status.
Continuous Select recording stream in case of Continuous mode.
Event Select recording stream in case of Event mode.
Start recording before set time, if event occurs.
Pre-Alarm
(none, 1 sec, 2 sec, 3 sec, 4 sec, and 5 sec)
Recording after set time until event ends.
Post-Alarm
(5 sec, 10 sec, 30 sec, 1 min, 5 min, 10 min, 30 min, and 1hour)
Copy main recording image set value to other channels.
Setup
Function
67