Stream - Eneo PNR-5316 User Manual

Part 3 - Configuration
• Focus Mode: Used to change the focus movement
format as Auto/Manual/Semi-Automatic. It may not
be supported depending on the device.
• WDR: Disables or enables the WDR (Wide Dynamic
Range). When the very dark and very bright areas
exist simultaneously on the screen, WDR allows you to
recognize the both areas.
• IRIS: Select the lens IRIS type. If a manual IRIS lens is
mounted on the camera, select Manual. If a DC-type
auto IRIS lens is mounted, select DC IRIS.
• Shutter Speed Control: Adjust Shutter Speed. This
option is available only when Anti-Flicker and Slow
Shutter are both set to Off.
- Auto: The system will assess the lighting conditions
and adjust the shutter speed automatically.
- Manual: Use the slider to select the desired
shutter speed. Select the most suitable minimum
and maximum shutter speeds for the lighting
conditions in the area where the camera is located.
(1/30 to 1/8000)
Select Apply after setting up a camera to see images
from the concerned camera on the left side of the
screen. Selecting Apply or OK displays a popup screen
that indicates whether the camera has been set up
successfully or not.
Miscellaneous
• Image Stabilizer: Activate Image Stabilizer. The
Image Stabilizer reduces blurring caused by camera
shake that results from external conditions such as
the wind.
62

Stream

Configure the camera's live and recording resolution,
picture quality and ips speed settings.
• Camera Channels: It's possible to configure a unique
stream for each camera.
•
: Apply the stream settings of the camera
selected under Camera Channel to a different camera.
• Stream: Configure Stream 1, Stream 2, or Stream 3.
- Resolution: Select a resolution supported by the
camera. Maximum available resolution is chosen
automatically based on the selected streams.
- Quality: Select Very High, High, or Standard. You
can assign different Quality settings to different
cameras.
- ips: Select a value between 1 and 30. Maximum ips
is determined automatically based on the selected
the stream.
• Live Video Profile: Check the current Live streams.
It allows you to select the streams according to split
screen.
• Record Video Profile: Display 3 record video profile.
• Remote Setup: Set up the remote streams.