Stream - Eneo IER-25R040004A User Manual

4.5.2

Stream

To set the image resolution when event occurs across channels or general recording is in process.
Stream > Main Stream
To set the image quality and resolution of Main Stream
No.
1
2
3
4
5
6
7
IER-25Nxxx
Figure 4-28 RECORD > Stream > Main Stream
Table 4-30 RECORD > Stream > Main Stream Item and Description
Name
CH Display channels.
Resolution Show camera main stream setup status.
Framerate
Bitrate
Continuous Select recording stream in case of Continuous mode.
Event Select recording stream in case of Event mode.
Start recording before set time, if event occurs (null, 1 sec, 2 sec, 3 sec, 4
Pre-Alarm
sec, and 5 sec).
Post-Alarm Recording after set time until event ends (null, 5 sec, 10 sec, 30 sec, 1 min,
5 min, and 10 min).
Copy Stream Copy main recording image set value to other channels.
Setup
Function
Seite 53