Ptz > Ptz - Eneo IER-38R160005A User Manual

No. Name
2 Discover
3 Enable CHAP
4 User Name
5 Password
6
Note
4.4.3 PTZ > PTZ
To use PTZ Function of the device, users need to match ID, protocol, and speed with each camera.
No.
1 Copy PTZ Setup
2
3
User Manual
Click to search iSCSI storage.
Select Enable CHAP if iSCSI use CHAP authentication.
Enter user name of CHAP authentication.
Enter password of CHAP authenticatioin.
Click to register the discovered iSCSI storage. User can add iSCSI one by one.
Add
If recorder does not have any internal HDD, the recorder reboot automatically
and complete mounting process.
 If iSCSI file system is different with recorder, it must be formatted.

If user wants to change recorder IP address, iSCSI must be deleted.
 iSCSI device block size must be set as 512byte.

iSCSI device IP address must be set as static IP not DHCP.
Figure 4-34 DEVICE > PTZ > PTZ
Table 4-35 DEVICE > PTZ > PTZ Item and Description
Name
Apply setting history to all or selected channels in the same way.
CH Display channels.
ID Select camera ID connected to relevant channels (1-255).
Function
Function
60