Network; Basic - Eneo IER-38R160005A User Manual

4.7

NETWORK

In NETWORK, users may set the network environment.
4.7.1

Basic

Basic > WAN Port
To set the network WAN port
No. Name
1 Static IP
2 DHCP (Dynamic) Select whether to use DHCP (Dynamic).
3 MAC Address
4 DNS
5 Port (TCP/RTSP) Enter TCP and RTSP port. Default is 9350.
Encryption
6
7 Port(Http/Https)
8 Redirect to HTTPS Select to allow HTTPS connect by request.
9 Port(IPC)
10 Edit NAT
User Manual
Figure 4-53 NETWORK > Basic > WAN Port
Table 4-54 NETWORK > Basic > WAN Port Item and Description
Check if you use static IP. For using static IP, enter IP address, Subnet
Mask, and Gateway.
Display the MAC Address.
Select manual and enter DNS; otherwise choose automatic function.
Select the Encryption box for video data by using TCP port.
Select to encrypt for video data through TCP port.
Enter HTTP/HTTPS port. Default is 80.
User can access camera directly using IPC port. Default is 5000.
Select the protocol to be used for IP camera remote connection, either http
or https, or block the connection.
Function
80