Eneo IER-38R160005A User Manual page 52

Table 4-20 CAMERA > Advanced > Video Analytics Setup Item and Description
No. Name
1 CH
2 Mode
3 Enable Video
Contents Analysis

Note

Smart Codec Setup
The Smart Codec function allows reduce bandwidth by using compression and frame rate control.
Table 4-21 CAMERA > Advanced > Smart Codec Setup Item and Description
No. Name
1 CH
2 Enable ROI
3 ROI
4 ROI Quality
5 Non-ROI Quality Set quality of the non-selected area.
6 Non-ROI fps
8 New ROI Area

Note
User Manual
Display channel.
Select whether to use this function in the NVR.
Select to activate the VCA menu on the camera.
The Video Analytics (VA) menu is displayed only when a camera with VA
function is connected..
The setting contents differ depending on the connected camera. For details,
refer to the camera manual.
Figure 4-20 CAMERA > Advanced > Smart Codec Setup
Display channel.
Select to activate Hi-Stream function. Video mode will be fixed to CVBR.
Select Static ROI or Dynamic ROI.
Static ROI is controlled based on the selected area.
Dynamic ROI is controlled based on the entire area.
Set quality of the selected area.
Set frame rate of the non-selected area.
Click to create ROI area.
The Smart Codec menu is displayed only when a camera with Smart Codec
function is connected.
Function
Function
48