Table of Contents
Advertisement
5.3.3 Setting mode 3
Display mode
Setting mode 3 is selected by pressing SET and DISPLAY switches continuously for longer than 3 seconds.
Pushing MODE switch performs movement of setting item.
The present mode can be returned to the display mode by pressing DISPLAY switch.
< Caution >
If setting change should have been mistaken, a display and output of measurement are not obtained correctly.
Therefore, users must not set. The setting item without the corresponding option is not displayed.
SET and DISPLAY
3 seconds
DISPLAY
Input circuit setting
DISPLAY
Tidal current measurement setting
DISPLAY
Analog output adjustment
311～312
MODE
321
MODE
331～336
MODE
51
SFLC-211-185
Setting mode 3
Advertisement
Table of Contents
