Table of Contents
Advertisement
4.2.3 Setting display
It is the display at the case of various setting. There are three types of setting modes according to the
contents of a setting.
Operation and the contents of setting (detail) in setting mode, please refer to "5 Setting".
① Setting mode 1
Setting of a measurement display element, an
alarm output, and an alarm value is mainly
performed.
And, an alarm output can be tested in this
setting mode.
② Setting mode 2
Setting of measurement range, analog output,
pulse output, and measurement display ON/OFF
is mainly performed.
And, initialization of a setting value and
reset of watt-hour integrated value can be
performed in this setting mode.
③ Setting mode 3
Setting of an input circuit and tidal current
measurement is mainly performed.
And, analog output can be adjusted in this
setting mode.
New setting
Now setting
Setting No.
New setting
Now setting
Setting No.
Setting factor
New setting
Now setting
Setting No.
(No.311 Input circuit phase line change)
17
SFLC-211-185
Setting mode 1
(No.111 Display pattern)
Setting mode 2
(No.211 Voltage range)
Setting mode 3
Advertisement
Table of Contents
