5.3.2 Setting mode 2
Display mode
Setting mode 2 is selected by pressing SET and RESET/SHIFT switches continuously for longer than 3 seconds.
Pushing MODE switch performs movement of setting item.
The present mode can be returned to the display mode by pressing DISPLAY switch.
< Caution >
If setting change should have been mistaken, a display and output of measurement are not obtained correctly.
Therefore, users must not set. The setting item without the corresponding option is not displayed.
SET and
RESET/SHIFT
3 seconds
DISPLAY
Measurement range setting
DISPLAY
Analog output setting
DISPLAY
DISPLAY
External operation input setting
DISPLAY
Measurement display ON/OFF setting
DISPLAY
211~21D
MODE
221A~227A
MODE
231P~232P
Pulse output setting
MODE
241
MODE
251~25C
MODE
261~262
Other setting
MODE
43
SFLC-211-185
Setting mode 2