Operation; The Main Monitor Display-Element Change; Phase (Line) Display Change - DAIICHI SFLC-110L Instruction Manual

4.3 Operation

4.3.1 The main monitor display-element change

The measurement display element of the main monitor is changed. A change is performed by ＋ －.
A measurement display and maximum display，minimum display can also perform this operation.
After changing a measurement display element, if a switch is not operated for 10 minutes, it will return
to the original measurement display element automatically.
In a maximum display and minimum display, even if a switch is not operated for 10 minutes, it does not
return to the original display.
－
＋
Main monitor A(R)
4.3.2 Phase (line) display change (Three-phase three-wire, Single-phase three-wire)
A phase (line) display of current or voltage is changed. (Everything which is being indicated.)
A change is performed by DISPLAY .
A measurement display and maximum display，minimum display can also perform this operation.
In addition, after changing a phase (line) display, if a switch is not operated for 10 minutes, it will return
to the original phase (line) display automatically.
In a maximum display and minimum display, even if a switch is not operated for 10 minutes, it does not
return to the original display.
A(Y) display
W
V(RY)
display
display
A(Y) display
－
＋
V(RY)
display
No operation
10 minute
DISPLAY
Wh
display
No operation 10 minute
Wh
W
display
display
Main monitor A(Y)
(Initial display)
DISPLAY
18
＋
－
Main monitor A(B)
SFLC-211-185
＋
－
DISPLAY