Setting In Detail Explanation; Setting Mode 1 - DAIICHI SFLC-110L Instruction Manual

(13) Backlight setting
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Press SET for longer than 3 seconds
Sets the action of
backlight.
(151)
(141H)
Selected backlight action is entered
Press SET for longer than 3 seconds
Sets the brightness
of backlight.
(141H)
(152)
Press SET
Returns to display mode.
(14) Other, measurement setting
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Sets the tidal
Press SET and DISPLAY together for longer than 3 seconds
current
measurement of
Press RESET/SHIFT
reactive power and
power-factor.
Press SET
(321)

5.3 Setting in detail explanation

5.3.1 Setting mode 1

Display mode
Setting mode 1 is selected by pressing SET switch for longer than 3 seconds.
Pushing MODE switch performs movement of setting item.
The present mode can be returned to the display mode by pressing DISPLAY switch.
Press MODE Select a backlight action by ＋ and －
(151)
Press MODE Press RESET/SHIFT
(151)
Selected backlight brightness is entered
Select a tidal current measurement ON/OFF by ＋ and －
(322)
Selected action is entered
SET
3 seconds
DISPLAY
Display setting
DISPLAY
Alarm output setting
DISPLAY
Demand detection setting
DISPLAY
Instant measurement detection setting
DISPLAY
Backlight setting
Setting and operation procedures
Press MODE
(111)
Press DISPLAY
Press MODE
(111)
Select a brightness by ＋ and －
(152)
Setting and operation procedures
Press DISPLAY
111～116
MODE
121AL～123AL
MODE
131H～135
MODE
141H～142L
MODE
151～152
MODE
35
Press MODE Press MODE
(121AL) (131H)
Press SET
Returns to display mode.
Press MODE Press MODE
(121AL) (131H)
Press DISPLAY
Press MODE
(311)
Returns to display mode.
Setting mode 1
SFLC-211-185
Page
42
42
Page
(321)
53