Table of Contents
Advertisement
5.2 Setting table
A setting item changes by the specification of a product, or the existence of an option.
(1) Important setting
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Press SET and DISPLAY together for longer than 3 seconds
Sets the phase wire
of input circuit.
Select an phase wire by ＋ and －
(311)
Selected phase wire is entered
Press SET and DISPLAY together for longer than 3 seconds
Sets the input
voltage
Select an input voltage (In case of 1φ3W, it is phase-voltage full scale) by ＋ and －
(phase-voltage
full scale).
(312)
Returns to display mode.
Press SET and RESET/SHIFT together for longer than 3 seconds
Sets the
measurement range
Select a measurement range by ＋ and －
of voltmeter
(211)
Selected measurement range is entered
Press SET and RESET/SHIFT together for longer than 3 seconds
Sets the
Press RESET/SHIFT
measurement range
of ammeter
(213)
Returns to display mode.
Press SET for longer than 3 seconds
Sets the display
combination
(111)
Returns to display mode.
Press SET and RESET/SHIFT together for longer than 3 seconds
Sets the output
factor of analog
Select an output factor by ＋ and －
output 1 (AO1).
(221A)
Selected output factor is entered
Press SET and RESET/SHIFT together for longer than 3 seconds
Sets the output
factor of analog
Press RESET/SHIFT
output 2 (AO2).
(222A)
Selected output factor is entered
Press SET and RESET/SHIFT together for longer than 3 seconds
Sets the output
Press RESET/SHIFT
factor of analog
output 3 (AO3).
(223A)
Returns to display mode.
Setting and operation procedures
Press SET
Selected input voltage is entered
Press RESET/SHIFT
(212)
Press SET
Selected measuring range is entered
Press SET
Selected display combination is entered
Select an output factor by ＋ and －
(222A)
Press RESET/SHIFT
(222A)
Press SET
Selected output factor is entered
Press SET for longer than 3 seconds
Press DISPLAY
Returns to display mode.
Press DISPLAY
Press SET
Press DISPLAY
Select a measuring range by ＋ and －
(213)
Select the display combination by ＋ and －
(111)
Press SET
Press DISPLAY
Returns to display mode.
Press DISPLAY
Returns to display mode.
Select an output factor by ＋ and －
(223A)
Press DISPLAY
28
(311)
Press RESET/SHIFT
(311)
(312)
(211)
Returns to display mode.
(211)
Press DISPLAY
Press DISPLAY
Press MODE
(211)
(221A)
Press MODE
(211)
(221A)
Press SET
Press MODE
(211)
(221A)
SFLC-211-185
Page
52
52
44～
47
44～
47
36～
40
48
48
48
Advertisement
Table of Contents
