Keypad Settings - Honeywell NX series User Manual

Constant and variable torque variable speed drives for induction motors
Hide thumbs Also See for NX series:
Table of Contents

Advertisement

7
96(110)
Start-up Wizard (P6.5.3)
The Start-up Wizard is a feature on the control keypad to facilitate the commissioning of the frequency
converter. If selected active (default), the Start-up Wizard prompts the operator for the language and
application of his/her choice plus for the values for a set of parameters common to all applications as
well as for a set of application-dependent parameters.
Always accept the value with the Enter button, scroll options or change values with the Browser buttons (up
and down arrows).
Set the Start-up Wizard active in the following way: In the System Menu, find page P6.5.3. Press the
button right
once to reach the edit mode. Use the
selection with the
Enter
the parameter value No.
READY
I/O term
Startup wizard
No
Figure 7-16. Activation of Start-up wizard
Multimonitoring items (P6.5.4)
Honeywell alpha-numeric keypad features a display where you can monitor even three actual values at the
same time (see chapter 7.3.1 and chapter Monitoring values in the manual of the application you are
using). On page P6.5.4 of the System Menu you can define if it is possible for the operator to replace the
values monitored with other values. See below.
READY
I/O term
Multimon. items
ChangeEnable
Figure 7-17. Enabling the change of multimonitoring items
7.3.6.6

Keypad settings

In the Keypad settings submenu under the System menu you can further customise your frequency
converter operator interface.
Locate the Keypad settings submenu (S6.6). Under the submenu, there are four pages (P#) associated
with the keypad operation:
Keypad settings
Figure 7-18. Keypad settings submenu
CONTROL KEYPAD
button. If you want to deactivate the function follow the same procedure and give
READY
I/Oterm
Startup wizard
No
I/O term
Multimon. items
ChangeEnable
READY
I/O term
P1 P5
Browser buttons
to set value Yes and confirm the
I/Oterm
Startup wizard
Yes
READY
enter
READY
I/Oterm
Default page
0.
READY
enter
CONFIRM
CANCEL
READY
I/Oterm
Multimon. items
ChangeDisable
Menu

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents