Copy Parameters - Honeywell NX series User Manual

7
92(110)
System Menu
Application
Standard
Figure 7-10. Change of application
7.3.6.3

Copy parameters

The parameter copy function is used when the operator wants to copy one or all parameter groups from
one drive to another or to store parameter sets in the internal memory of the converter. All the parameter
groups are first uploaded to the keypad, then the keypad is connected to another drive and then the
parameter groups are downloaded to it (or possibly back to the same drive).
Before any parameters can successfully be copied from one drive to another the drive has to be stopped
when the parameters are downloaded to it:
The parameter copy menu (S6.3) embodies four functions:
Parameter sets (S6.3.1)
The NX frequency converter features a possibility for the user to load back the factory default parameter
values and to store and load two customised parameter sets (all parameters included in the application).
On Parameter sets page (S6.3.1), push the
LoadFactDef begins to blink and you can confirm the loading of factory defaults by pushing the Enter
button. The drive resets automatically.
Alternatively you can choose any other of the storing or loading functions with the
Confirm with the Enter
Parameter sets
Select
Parameter sets
Wait...
Figure 7-11. Storing and loading of parameter sets
CONTROL KEYPAD
STOP READY
I/Oterm
S1 S11
STOP READY
I/Oterm
Menu button right
button. Wait until 'OK' appears on the display.
READY
READY
STOP
I/Oterm
Application
Standard
STOP
I/Oterm
Application
enter
Multi-step
to enter the Edit menu. The text
READY
Parameter sets
LoadFactDef
READY
Parameter sets
OK
READY
READY
Browser buttons.
enter
CONFIRM
CANCEL