Hayward AquaRite + Owner's Manual page 10

Connecting a Heating System (Aux 4)
The AquaRite+ is compatible with all types of pool heaters such as heat pumps and gas heaters. The use of the Temperature Probe Upgrade
Kit is required for correct the operation of the system if it is to control a heater.
Connecting to a heating system not fitted with a remote On/Off control:
In this case, the heating is controlled in series with the heater flow/pressure switch. Connect a 2 x 0.75 mm² double
insulated cable in series with the flow detection system on the heater. Set the heating system set point to maximum. The
AquaRite+ will use its own water temperature probe to control the heating set point.
Connecting the T-Cell
Your AquaRite+ has come with one of the below listed Turbo Cells in the box. To connect the T-Cell plug it in to the terminal beneath
the device (circled below). The different sized T-Cells that can be connected to the device are listed in the table below. Once the T-Cell is
connected, the correct T-Cell needs to be selected in the configuration menu for the unit to work correctly. Refer to Page 15 for details.
T-Cell Model
T-CELL-3
T-CELL-9
T-CELL-15
Please Note: The AquaRite+ has been configured for operation with the T-Cell that has been supplied with the unit. If at a later date you
choose to move to a smaller or larger capacity T-Cell, the AquaRite+ will need to have the new size T-Cell selected in the configuration
menu as explained on page 15 of this manual for proper operation, and the Cell Hour counter will need to be reset.
*If the pool will be constantly heated, then sizing of the T-Cell will need to follow the recomendations for tropical climate.*
Characteristics
Power Supply
Current Consumption
Power Consumption
Ingress Progression
Pump Power Socket Outlet
Dimensions
Page 10
View of the underside of the AquaRite +
Max.
Wattage
3 A (27 V) 101 W
5 A (27 V) 155 W
6.5 A (27 V) 196 W
240 V a.c. 50 Hz
3 A
200 W (10 Amp maximum with filter pump plugged into power control socket)
IPX 3
240 V a.c. 7 Amps Maximum Load
270 x 220 x 150
USE ONLY HAYWARD
Plug cell in here
100% Chlorine
Gas Production
Cool Climate
10 g/hr max 55,000 L
20 g/hr max 95,000 L
30 g/hr max 150,000 L
®
GENUINE REPLACEMENT PARTS
Pool Size
Tropical Climate
35,000 L
75,000 L
110,000 L