Teknic CLEARPATH MCVC Series User Manual page 159

C P M C / S D U
L E A R A T H
• The LED will remain off. Toggling the Enable will not clear this shutdown.
Once voltage returns to approximately 20VDC or higher:
• ClearPath will remain in a shutdown state but the LED will "wake up" and flash a yellow
blink code 6 (see table above for complete description of this exception code).
• At this point, toggle the enable to clear the shutdown.
T , I .
EKNIC NC
M R . 3 . 0 9
S E R A N U A L E V
1 5 9
T . (585) 784-7454
EL