Inputs And Views Menu - Planar UltraRes X Series User Manual

18. Inputs and Views Menu

This menu shows how the sources will be laid out on the screen based on the current Multi-
Source View and Advanced Layouts selections.
Multi-Source View
•
Select the Multi-Source View mode
•
Options: Single, Dual, Triple, Quad, PIP; Default: Single
•
Note: For the Advanced Layouts submenu, refer to page 39.
•
Note: You can only use 4K/60Hz in Single mode.
Zone 1
•
Select the source displayed in Zone 1
•
Options: HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP, OPS; Default: HDMI 1
•
Note: If HDMI1 was selected as another source, OPS cannot be selected. If OPS was
selected as another source, HDMI1 cannot be selected.
Zone 2
•
Select the source displayed in Zone 2
•
Options: HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP, OPS; Default: HDMI 2
•
Note: If HDMI1 was selected as another source, OPS cannot be selected. If OPS was
selected as another source, HDMI1 cannot be selected.
Zone 3
•
Select the source displayed in Zone 3
•
Options: HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP, OPS; Default: HDMI 3
•
Note: If HDMI1 was selected as another source, OPS cannot be selected. If OPS was
selected as another source, HDMI1 cannot be selected.
Planar UltraRes X Series User Manual
020-1396-00A
Page | 38