System Inputs Table - Inner Range concept iq User Manual

Version 1.03 January-2002
System Inputs are mapped to the following Input Numbers.
ALARM I/P
No.
AC Fail 101
Low Battery 102
Cabinet Tamper 103
Siren Monitor Alarm 104
LAN Fuse fail 105
Battery Fuse fail 106
Comms Fail 107
System Reset 108
Keypad Lockout 109
Zone Self Test Fail 110
Keypad Medical Alm 111
Keypad Panic Alarm 112
Keypad Duress Alarm 113
Keypad Fire Alarm 114
Programming Change 115
Door Alarm. Door 1 116
Door Alarm. Door 2 117
Door Alarm. Door 3 118
Door Alarm. Door 4 119
Test Report 120

7. System Inputs Table

Zone DESCRIPTION
Lamp
1 The AC mains has failed, or has been absent for more than the
AC Fail delay time.
2 Battery voltage is too low to provide backup power if AC fails.
3 Un-authorised removal of cabinet cover or removal of the
cabinet from it's mounting surface.
4 The Siren speaker is disconnected from the Control Panel.
5 LAN fuse has blown. Short circuit or over-current condition.
6 Battery fuse has blown. Short circuit or over-current condition.
7 System failed to report.
8 The system has been powered down and powered up again
9 System has registered 5 incorrect PIN code attempts in a row.
10 One or more Zone Inputs have failed the Zone Self Test
11 The Medical Alarm has been activated on a Terminal keypad.
12 The Panic Alarm has been activated on a Terminal keypad.
13 A Duress PIN code has been entered on a Terminal keypad.
14 The Fire Alarm has been activated on a Terminal keypad.
16 There has been a programming change in the system database
15 "Door Forced" or "Door Held" Condition on Door 1.
"Door Forced" or "Door Held" Condition on Door 2.
"Door Forced" or "Door Held" Condition on Door 3.
"Door Forced" or "Door Held" Condition on Door 4.
- A Test report transmission has been sent.
25