Inner Range concept iq User Manual page 13

Version 1.03 January-2002
6. Assign the User Area or Areas. (Only required if you have a Multi-Area System)
Press (A long beep will sound if the System is not in Multi-Area mode)
Then for each Area that is to be assigned to this User,
Press , then an Area option number
OPTION: 0 All Areas De-selected.
1 General Area (Single Area Mode) or Area 1 (Multi-Area Mode) selected.
2 Area 2 selected
3 Area 3 selected
4 Area 4 selected
When access control is provided, Area assignment also detemines which Doors a User may access.
Access is only granted at Door/s associated with the User's Area/s.
2 beeps will sound to confirm the new Area Option has been selected.
e.g. If Area 1 and Area 3 are to be assigned to the User;
Press <*>, 1, <ENTER>; <*>, 3, <ENTER>.
To change another user simply repeat steps 2 to 7.
DELETING A USER
1. Enter the User Editing Mode.
Press , ,
2. Enter the User number to be changed.
Press , then the User number
The User number will be displayed on the Terminal.
3. Delete the User.
Press , then
, then
.
(User 2 to User 47), then
to delete the PIN code and/or Card data for this User number. .
13