Day Alarm On / Off; Day Alarm On / Off; Reset Latching Auxiliaries; Answer Phone - Inner Range concept iq User Manual

22

4.15 DAY ALARM ON / OFF.

This operation dis-ables and enables the Day Alarm function.
If the Day Alarm is programmed to operate then this operation will disable it.
If the Day Alarm has been disabled, this operation will re-enable it.
NOTE: If Disabling, if the Day Alarm is currently On, it will turn Off.
If Enabling, the Day Alarm will turn On for the programmed timer period.

4.16 RESET LATCHING AUXILIARIES.

This operation will reset any Auxiliaries that are a "latching" type, and any Auxiliaries that are
currently On with a timer running. (i.e. Auxiliaries that don't have an "Off" function programmed.)

4.17 ANSWER PHONE.

This operation will cause the Control Module to answer an incoming telephone line call when
connection is required for remote programming.
IMPORTANT NOTE: THIS OPERATION IS ONLY TO BE USED WHEN INSTRUCTED TO DO SO
BY THE INSTALLER OR MAINTENANCE TECHNICIAN.
4.18 SMOKE DETECTOR RESET.
Smoke Detectors connected to your system may be of the "Latching" type. These smoke detectors
need to be reset after they have been triggered into alarm.
This operation instructs the Control Module to activate the Smoke Detector Reset Auxiliary, to
perform the reset function on any latching smoke detectors. The Auxiliary will automatically turn off
after a time period (usually only a couple of seconds) programmed by the installer.
Consult your installer to ascertain whether your system requires use of this operation.
Version 1.03 January-2002
NEXT 94
NEXT 96
NEXT 97
NEXT 99