Accessing The Operational Modes - Inner Range concept iq User Manual

Version 1.03 January-2002

4.0 ACCESSING THE OPERATIONAL MODES.

The Default Master Code is 0123. (Or 012345 is system is configured for 6 Digit PIN codes)
This Code should be changed as soon as possible after installation.
When choosing a new Master Code, ensure that a PIN code is chosen that will not be forgotten,
while still providing security against unauthorised access.
Master User Operations require the User to Access a number of different Operational Modes.
This is done by entering a valid Master PIN code, then pressing the <NEXT> key before selecting
the 2-digit Mode number. e.g.
Enter PIN;
This key sequence must be used to access all Operational Modes described in this section.
The descriptions of each operation will only show the key sequence <NEXT>, n, n. when showing
how to access the Operational mode required. Remember that this is preceded by the PIN code.
Master Operations Mode Indication.
The <FAULT> and <PWR> Lamps will flash together to indicate that the system is in Master User
Operational Modes.
Exiting the Master User Operations.
Press to exit any of the Master Operations.
4.1 Adding / Changing / Deleting Users. ...................................................................... NEXT 20
4.2 View history. .............................................................................................................. NEXT 21
4.3 Walk test mode. ........................................................................................................ NEXT 22
4.4 Setting the Real-Time Clock. .................................................................................. NEXT 23
4.5 Auxiliary Control and Test mode. ............................................................................ NEXT 24
4.6 Fault Analysis mode. ............................................................................................... NEXT 25
4.7 Zone Self Test display. ............................................................................................. NEXT 26
4.8 Edit Telephone numbers. ......................................................................................... NEXT 27
4.9 View Sofware Version number. ............................................................................... NEXT 28
4.10 Acknowledge Door Alarms. ..................................................................................... NEXT 29
4.11 De-Isolate System Inputs. ....................................................................................... NEXT 90
4.12 Test Siren speaker and Strobe (Aux. 1). ............................................................... NEXT 91
4.13 Battery Test. .............................................................................................................. NEXT 92
4.14 Test Transmission. (Test report) ............................................................................ NEXT 93
4.15 Day Alarm on / off. .................................................................................................... NEXT 94
4.16 Reset Latching Auxiliaries. ...................................................................................... NEXT 96
4.17 Answer Phone .......................................................................................................... NEXT 97
4.18 Reset Smoke Detectors. .......................................................................................... NEXT 99
Master User Operations
... , then , then the Mode number;
11
,