Emergency Alarm Activation. -Panic, Fire And Medical Alarms; Pin Code Duress Alarm Activation; Acknowledge Alarms - Inner Range concept iq User Manual

10

3.6 EMERGENCY ALARM ACTIVATION. -PANIC, FIRE AND MEDICAL ALARMS.

Depending on the configuration of the Emergency Alarm options, each different Emergency alarm
can activate the Siren and/or the Dialer communications.
Consult with the Installer to detemine how each Emergency Alarm will operate.
The Emergency Alarms are activated by pressing two specific keys on the Terminal keypad
simultaneously.
PANIC
FIRE
MEDICAL

3.7 PIN CODE DURESS ALARM ACTIVATION.

If enabled in your system, this function allows the User to activate the PIN Code Duress alarm while
performing any normal LED Terminal operations.
When activated, the system sends a silent Duress report to the Central Monitoring Station. No local
indication is provided. See additional notes on Page 5.
To activate the PIN Code Duress alarm.
Simply enter your PIN code at an LED Terminal in the normal manner, but increase the last digit of
your PIN by a value of 1. NOTE: If the last digit is a 9, then it becomes 0.
e.g. If your PIN code is 3456 then enter 3457. If your PIN code is 3579, enter 3570.

3.8 ACKNOWLEDGE ALARMS

Note the details of any alarms.
When an alarm has occurred, the details of the alarm are displayed on the LED Terminal:
- The Zone Lamps will flash fast to indicate the Zone (or Zones) that are in alarm.
- The Area Lamps will flash to indicate the Area (or Areas) in which the alarm has ocurred.
Dis-Arm the System.
Follow the normal procedure for Dis-Arming the System.
NOTE: In a Multi-Area System, the Area in which the Alarm has occurred must be Dis-Armed.
Acknowledge the Alarms.
Enter PIN;
Performing this operation when the System is Dis-Armed will acknowledge the alarms.
i.e. Clear the alarms from the display.
and keys pressed at the same time.
and keys pressed at the same time.
and keys pressed at the same time.
... ,
Version 1.03 January-2002