Table of Contents
Advertisement
Speci cations
Power supply:
Power consumption:
Ambient temperature:
Admissible ambient humidity:
Dimensions:
Contact rating:
Program memory backup:
Battery:
Backlight :
IP rating:
Pollution degree:
Rated impulse voltage:
Automatic action:
230Vac 50-60Hz
10mA
0...45°C
5-95%RH
170 x 116 x 63 mm
13A / 250Vac
Internal
LIR 2032
White
IP20
Pollution Degree 2
Resistance to voltage surge 2KV
as per EN60730
Type 1C
Immersion Controller
3
Advertisement
Table of Contents
Need help?
Do you have a question about the IMC and is the answer not in the manual?
Questions and answers
Hi i forgot pin to my controller is any chance to reset some how ?
To reset the PIN on an EPH Controls IMC controller, follow these steps to perform a factory reset, which will remove the PIN:
1. Press the button until ‘P01’ flashes on the screen.
2. Use the arrow buttons to scroll to ‘P05’.
3. Press the button again. ‘No’ and ‘rst’ will appear on the screen.
4. Use the arrow buttons to scroll to ‘YES’.
5. Press the button to confirm.
The device will restart and return to its factory default settings, including removal of the current PIN.
This answer is automatically generated