Table of Contents
Advertisement
Operating Switch
This function allows you to change the operating mode of the controller.
There are two selections 'OFF' and 'Timed' .
Setting Controller to OFF
Use the Operating Switch to set the controller to OFF.
The controller will not operate when the switch is set to OFF.
Setting Controller to TIMED
Use the Operating Switch to set the controller to TIMED.
The controller will switch on and o based on the time programs set by the user in
the PROG mode. (Factory settings on page 14)
Setting Controller to BOOST
Note: Boost is only possible when the operating switch is set to TIMED
Press the
once for 30 minutes, twice for 1 hour, three times for 2 hours, four
times for 3 hours. Press
to con rm BOOST time required.
The controller will activate for the selected period and then revert to its previous
timed program.
12
IMC
Advertisement
Table of Contents
Need help?
Do you have a question about the IMC and is the answer not in the manual?
Questions and answers
Hi i forgot pin to my controller is any chance to reset some how ?
To reset the PIN on an EPH Controls IMC controller, follow these steps to perform a factory reset, which will remove the PIN:
1. Press the button until ‘P01’ flashes on the screen.
2. Use the arrow buttons to scroll to ‘P05’.
3. Press the button again. ‘No’ and ‘rst’ will appear on the screen.
4. Use the arrow buttons to scroll to ‘YES’.
5. Press the button to confirm.
The device will restart and return to its factory default settings, including removal of the current PIN.
This answer is automatically generated