Table of Contents
Advertisement
Programming Timed Mode
Adjusting the program settings in 24H Mode
There are three On/O times per day possible, represented by P1, P2 and P3.
Press the
once.
The day(s) of the week being programmed will appear at the top of the screen, the
di erent modes (5/2 d, 7 d & 24 hr) can be chosen in the TIME menu (see page 11)
Press
or
Press
or
Press
or
Press
or
Press
or
Press
or
Press
or wait 30 seconds to return to normal operation.
to adjust the P1 ON time.
to adjust the P1 OFF time.
to adjust the P2 ON time.
to adjust the P2 OFF time.
to adjust the P3 ON time.
to adjust the P3 OFF time.
Immersion Controller
Press
.
Press
.
Press
.
Press
.
Press
.
Press
.
15
Advertisement
Table of Contents
Need help?
Do you have a question about the IMC and is the answer not in the manual?
Questions and answers
Hi i forgot pin to my controller is any chance to reset some how ?
To reset the PIN on an EPH Controls IMC controller, follow these steps to perform a factory reset, which will remove the PIN:
1. Press the button until ‘P01’ flashes on the screen.
2. Use the arrow buttons to scroll to ‘P05’.
3. Press the button again. ‘No’ and ‘rst’ will appear on the screen.
4. Use the arrow buttons to scroll to ‘YES’.
5. Press the button to confirm.
The device will restart and return to its factory default settings, including removal of the current PIN.
This answer is automatically generated