Table of Contents
Advertisement
Programming Timed Mode
Adjusting the program settings in 5/2D Mode
Press the
once.
MON – FRI will appear at the top of the screen.
Press
or
Press
or
Repeat this process for P2 and P3 On / O times.
SAT – SUN will appear at the top of the screen.
Repeat this process for the Saturday and Sunday programs
Press
or wait 30 seconds to return to normal operation.
16
to adjust the P1 ON time.
to adjust the P1 OFF time.
(Continued)
Press
Press
IMC
.
.
Advertisement
Table of Contents
Need help?
Do you have a question about the IMC and is the answer not in the manual?
Questions and answers
Hi i forgot pin to my controller is any chance to reset some how ?
To reset the PIN on an EPH Controls IMC controller, follow these steps to perform a factory reset, which will remove the PIN:
1. Press the button until ‘P01’ flashes on the screen.
2. Use the arrow buttons to scroll to ‘P05’.
3. Press the button again. ‘No’ and ‘rst’ will appear on the screen.
4. Use the arrow buttons to scroll to ‘YES’.
5. Press the button to confirm.
The device will restart and return to its factory default settings, including removal of the current PIN.
This answer is automatically generated