Table of Contents
Advertisement
Keypad Lock Function
The Keypad Lock function allows the user to prevent changes being made by
disabling the buttons.
Locking the keypad
To lock the keypad, press and hold both the
will appear on the screen. Keypad is now locked.
Unlocking the keypad
To unlock the keypad, press and hold both the
seconds.
will disappear from the screen. Keypad is now unlocked.
Note:
The user can still use the operating switch to change between TIMED and OFF modes even
when the keypad is locked.
18
Unlocked
and
and
IMC
together for 10 seconds.
together for 10
Advertisement
Table of Contents
Need help?
Do you have a question about the IMC and is the answer not in the manual?
Questions and answers
Hi i forgot pin to my controller is any chance to reset some how ?
To reset the PIN on an EPH Controls IMC controller, follow these steps to perform a factory reset, which will remove the PIN:
1. Press the button until ‘P01’ flashes on the screen.
2. Use the arrow buttons to scroll to ‘P05’.
3. Press the button again. ‘No’ and ‘rst’ will appear on the screen.
4. Use the arrow buttons to scroll to ‘YES’.
5. Press the button to confirm.
The device will restart and return to its factory default settings, including removal of the current PIN.
This answer is automatically generated