Table of Contents
Advertisement
Programming Modes
The IMC Controller has the following the following programming modes available:
24 Hour mode
5/2 Day mode
7 Day mode
If 7 D mode is selected, you can program each day of the week with 3 On and O
times.
If 24H mode is selected, you can only program each day of the week with the same 3
On and O times.
Programming all 7 days as one block with the same times.
Programing Monday to Friday as one block and
Saturday and Sunday as a 2nd block.
There are 3 On and O times per day possible.
Programming all 7 days individually with di erent times.
Immersion Controller
13
Advertisement
Table of Contents
Need help?
Do you have a question about the IMC and is the answer not in the manual?
Questions and answers
Hi i forgot pin to my controller is any chance to reset some how ?
To reset the PIN on an EPH Controls IMC controller, follow these steps to perform a factory reset, which will remove the PIN:
1. Press the button until ‘P01’ flashes on the screen.
2. Use the arrow buttons to scroll to ‘P05’.
3. Press the button again. ‘No’ and ‘rst’ will appear on the screen.
4. Use the arrow buttons to scroll to ‘YES’.
5. Press the button to confirm.
The device will restart and return to its factory default settings, including removal of the current PIN.
This answer is automatically generated