Table of Contents
Advertisement
Menu Function
This menu allows the user to adjust additional functions on the controller.
P01 - Backlight Function
Auto
There are two settings for selection, the factory default setting is AUTO.
AUTO: On pressing any button the backlight stays on for 10 seconds.
ON:
Backlight is permanently ON.
To adjust the backlight function, press
.
P01 will be ashing on the screen. Press
.
Press either
or
to select between AUTO and ON mode.
Press
to con rm and to return to normal operation.
19
Immersion Controller
Advertisement
Table of Contents
Need help?
Do you have a question about the IMC and is the answer not in the manual?
Questions and answers
Hi i forgot pin to my controller is any chance to reset some how ?
To reset the PIN on an EPH Controls IMC controller, follow these steps to perform a factory reset, which will remove the PIN:
1. Press the button until ‘P01’ flashes on the screen.
2. Use the arrow buttons to scroll to ‘P05’.
3. Press the button again. ‘No’ and ‘rst’ will appear on the screen.
4. Use the arrow buttons to scroll to ‘YES’.
5. Press the button to confirm.
The device will restart and return to its factory default settings, including removal of the current PIN.
This answer is automatically generated