Components - Rear View - Samsung SCS2U3100VER User Manual

LED Function
PWR Power
SYS System connected
GPS GPS signal
WAN WAN (Ethernet) connection
Description
Solid blue: normal
•
No light: abnormal
•
Solid blue: normal
•
Solid red: abnormal
•
Solid blue: normal
•
(GPS is received)
Blinking blue or red:
•
while searching for GPS
No light: abnormal (GPS
•
signal cannot be
received, the external
GPS antenna is
required)
Solid blue: normal
•
Blinking blue: data
•
communication
No light: abnormal
•

Components - Rear View

The rear of the Network Extender provides access to the WAN
port, power port, and external GPS antenna.
GPS Antenna Port slides to provide access to the external
1.
GPS antenna for removal and relocation.
• A red GPS LED indicates a GPS signal could not be detected using
the internal GPS antenna. The external GPS antenna should be
connected. See "External GPS Antenna" on page 13.
Heat Vents provide passive ventilation for the Network
2.
Extender and allow for dissipation of internally generated
heat.
Note: The Network Extender needs to remain vertical and in a well-ventilated
location. The vertical position allows proper air flow to the internal
components.
DC 12V Power Port provides power to the Network Extender
3.
when connected to the AC power supply and cord
(included).
Warning!: Only use the provided power cord and supply. Using any other
power source may damage the Network Extender.
Using Your Device 10