Table of Contents
Advertisement
Firmly press down on the Open groove (top of station).
3.
Slide the protective cover back to expose the rectangular
4.
GPS antenna.
Use a blunt tool (such as a coin) to carefully pry the GPS
5.
antenna away from the Network Extender, in the same
direction as shown in step 4.
Remove the GPS antenna from its compartment.
6.
GPS antenna
cover
Warning!: Do not force the connector into the GPS antenna port as this can
Tip: Place the antenna near a window where the GPS signal is strongest.
Warning!: Do not use duct tape to secure the GPS antenna to its new
Tip: You can use double-sided tape to secure the bottom of the GPS antenna
Connect and secure the GPS antenna to the end of the
7.
provided GPS cable labeled "Connect to GPS Antenna."
Connect and secure the terminal end of the same
8.
mini-coax cable to the port on the Network Extender
(within the GPS antenna compartment).
damage the connector.
Replace the cover on the station. Verify the cable is
9.
threaded through the opening on the cover.
Rotate the antenna back up to its original position.
10.
location.
to its new location.
External GPS Antenna
14
Advertisement
Table of Contents
