Samsung SCS2U3100VER User Manual page 7

Connect one end of the included Ethernet cable to an open
5.
LAN port on the router (1) and connect the other end to the
WAN port located at the rear of the Network Extender (2).
Note: Plug the Ethernet cable into the Network Extender before connecting
the power supply.
Plug the power supply connector into the DC 12V power
6.
port located at the rear of the Network Extender (3).
Insert one end of the power cord into the power supply and
7.
then plug the other end into an available power
outlet (4).
Warning!: Insert the plug into the power outlet last. Failure to do so could
cause an electrical short or power surge to the Network Extender.
Note: The use of a surge protector is recommended for the Verizon
Wireless Network Extender.
Getting Started 4