[Al. 070_Load-Side Encoder Initial Communication Error] - Mitsubishi Electric MR-JET- G Series User Manual

[AL. 070_Load-side encoder initial communication error]

• There is a communication error between the load-side encoder and servo amplifier.
[AL. 070.3_Load-side encoder initial communication - Receive data error 3]
Cause
1.
The values of the servo parameters for
manufacturer setting were changed.
1 SERVO AMPLIFIER TROUBLESHOOTING
58
1.3 Handling methods for alarms/warnings
Check/action method
Restore the values of the servo parameters for manufacturer setting to the
initial values.
Model
[JET-G]