Overview
Standby / Emergency stop button
1
2
Forward in feed
3
In feed for CDs/DVDs
In feed for paper and credit cards
4
5
Main switch
Collection unit for CDs/DVDs
6
7
Collection unit for paper and credit cards
Installation and operation
Place the equipment on a flat and even surface.
Make sure that the equipment is placed away from any radiators or hot areas.
Do not cover the cooling vent at the rear of the equipment.
Avoid the use of extension cables and multiple power sockets if possible, and connect
the equipment directly to a wall socket (as specified in the section on technical information).
Please keep the equipment at a distance of at least 4 inch away from the wall in order to
ensure the cooling vent has an adequate supply of air.
Operation:
Switch on the power button at the rear of the machine ("ON"). The symbol for standby mode which is
displayed as ("Standby")
The equipment is now ready to use. Should the symbol not light up, then please refer to the section
"General Troubleshooting" on page 8 of this manual.
will light up and the machine will go into standby mode.
Casters
8
9
Removal tray (Handle)
10 Overheating light
11 Overflow light
12 Reverse in feed
13 Cooling vent
14 Mains power supply
4