Related Manuals for Bonsaii C169-B
Summary of Contents for Bonsaii C169-B
- Page 1 Paper Shredder C169-B Inst Manual 14 Sheets Cross Cut Customer Service: support@bonsaii.com 1-844-728-6917...
- Page 2 Dear customer, Thank you for buying this quality product. Particularly take note of the following safety instructions. Please keep this instruction for future reference and pass it, when handing over this machine. Important Safety Notes Please see additional instructions of each warning as below. Please read the manual before operating the machine Check whether the voltage and frequency given in the rating lable at the back of the machine are the same as in your socket Empty wastebasket frequently a) Do not use the machine if the waste basket is not installed b) Do not use the machine if the waste basket is full Unplug the machine. a) before emptying the waste basket b) before any servicing or preservation actions are taken c) before opening the machine in case of repair Take note of the warnings on the top of the machine to avoid serious injury when your jewellery, tie or hand are too close to the machine The document shredder must always be deactivated and disconnected from the electrical line prior to moving, transporting and cleaning the device and prior to emptying the waste basket ...
- Page 3 Keep children away from the machine. This machine’s design and safety concept are based on adult dimensions to ensure that it can be operated safely by adults only Never insert fingers into opening. Serious injury may result! Keep all loose es of clothing, es, jewelry, long hair or other loose objects away from ...
- Page 4 Overheat Protec C169-B is equipped with a motor overheat prote on technology. The normal short duty cycle for con nuous shredding at maximum capacity is 30 minutes. A er 30 minutes of work, the ‘Overheat’ LED indicator lights up. Please wait and allow the unit to cool down...
- Page 5 Overload Protection C169-B is equipped with an overload protection technology. The maximum shredding capacity of this machine at one time is fourteen (14) sheets of A4 size 75g/m paper. Exceeding the shredding capacity e.g. inserting more than fourteen (14) sheets at one pass, or if the paper is not fed squarely into the feed opening, the ‘Overload’...
- Page 6 3. Allow the motor to cool down. 4. Plug the shredder into power source. Push the switch to ‘AUTO’ shredding. Should the instructions above not help to resolve the issue,please contact our customer service, support@bonsaii.com Shred type: Cross cut Shredding size:...
Need help?
Do you have a question about the C169-B and is the answer not in the manual?
Questions and answers
I have a Bonsai C169-B shredder. When I turn the switch to Auto, the power light comes on for about one second then goes out. Anything I can do to fix this? The shredder does not run.
The issue may be caused by an improper assembly of the trash can and shredder head, preventing the safety switch from activating. To fix this, check whether the raised buckle inside the trash can is correctly inserted into the safety switch device. If the safety switch is not triggered, the shredder will lose power. Refer to the troubleshooting guide to ensure proper assembly.
This answer is automatically generated
How can I remove the top part of empty? It seems to be stuck...I cannot separate the top part from the bin Is there a button to push to separate them? Bonsaii-C19-B
To separate the top part from the bin on the Bonsaii C169-B shredder, first unplug the machine. Then, check if the bin is full or improperly aligned, as this can cause it to stick. Gently rock the top part side to side while lifting straight up to release it. Avoid using excessive force to prevent damage.
This answer is automatically generated