Overview; Installation And Operation - Bonsaii D Series User Manual

Overview

1 Standby / Emergency stop button
2 Forward in feed
3 In feed
4 Aeration
5 Collection unit for paper
6 Removal tray (Handle)

Installation and operation

Place the equipment on a flat and even surface.
Make sure that the equipment is placed away from any radiators or hot areas.
Do not cover the cooling vent at the rear of the equipment.
Avoid the use of extension cables and multiple power sockets if possible, and connect
the equipment directly to a wall socket (as specified in the section on technical information).
Please keep the equipment at a distance of at least 10 cm away from the wall in order to
ensure the cooling vent has an adequate supply of air.
Operation:
Switch on the power button at the rear of the machine ("ON"). The equipment is now ready to use. Should
the symbol not light up, then please refer to the section "General Troubleshooting" on page 17 of this
manual.
7 Main switch
8 Power cord
9 Overheating light
10 Overflow light
11 Reverse in feed
13