Safety information Caution: Please read this manual before you start using the equipment, and keep hold of it for future reference. Please keep any long and/or flat objects, e.g. clothing (scarves, ties etc.) and any jewelry (necklaces, bracelets etc.) and any long hair away from the in feed area. Switch off the equipment when not in use for a sustained period of time.
Overview Standby / Emergency stop button Casters Forward in feed Removal tray (Handle) In feed for CDs/DVDs 10 Overheating light In feed for paper and credit cards 11 Overflow light Main switch 12 Reverse in feed Collection unit for CDs/DVDs 13 Cooling vent Collection unit for paper and credit cards 14 Mains power supply...
Page 5
Shredding paper Place the paper in portrait orientation into the corresponding in feed unit. The paper will be recognized by the sensors, and the cutter will begin to feed the paper through automatically. The equipment will stop once again after a short period when no paper has passed through the cutter. When no sheets of paper have been fed through for a period of three minutes, the equipment will revert to standby mode and have minimal power consumption.
3 years. Bonsaii will offer free service and support for this period as of the date of purchase. This warranty only applies to the quality of workmanship, and any faults in relation to materials or installation. Any improper usage, wear and tear, or unauthorized repairs are specifically excluded.
Machine sounds too Is the surface uneven? Is the Place the equipment on a flat surface. loud equipment in a straight position? Should the instructions above not help to resolve the issue, then please contact our customer service by support@bonsaii.com...
Equipment maintenance and cleaning As the cutter blades are very sharp and the engine is particularly powerful, you should take the appropriate precautions when using the equipment on a daily basis to ensure that any items of clothing, ties, scarves and hair do not fall into the equipment! The collection unit must be regularly checked and emptied if possible to ensure it is able to operate smoothly.
Need help?
Do you have a question about the S Series and is the answer not in the manual?
Questions and answers