Page 2
Dear customer, Thank you for purchasing this quality product. Please carefully read through this manual before first using the device, paying particular attention to the safety warnings. You can find information on how to contact support at the end of these operating instructions. Safety precautions: Cautions: 1.
Page 3
Operation instruction Parts & Function 1.Switch: REV/AUTO/FWD Power Light: Blue Overload Light: Flashing Red Overheat Light: Red 2. Feed Slot for Paper & Credit Card 3. Handle Place 4. Wastebasket 5. Transparent Window 6. Casters 7. Main Power Switch...
Page 4
Shredder capacity The C222-A is capable of shredding up to 20 sheets of paper (DIN A4, 75g/m²) into cross cut at once. Paper width may not exceed 220mm. When shredding small pieces of paper, such as envelopes or credit card receipts, the paper should be inserted in the middle of the slot.
Page 5
Shredding Credit Card Insert the card into the top center of the feed opening. You can only cut up one credit card at the time. Overloading If you insert too much paper over the maximum shred capacity of the shredder, the indication light will be red flashing, and the cutting unit will stop rotating.
Clean the dust or foreign objects. objects cover the sensor. The shredder is placed on a Loud Noise Change location unsuitable place. If the above operation can not solve your problem, please contact our customer service team via email customer-care@bonsaii.com.
Notice Never use flammable synthetic oil, petroleum based or aerosol lubricants to oil your cutting unit. Use only a vegetable oil-based lubricant in a non-aerosol container. C222-A/B Specifications: Model No. C222-A C222-B Max. 20 sheet Max. 16 sheet (inches) 5/32 x 1-50/87 inches 5/32 x 41/64 inches 1.6m/min (20 sheets)
Page 8
Bonsen Electronics Inc. : 4198 Industry Way, Flowery Branch, GA, 30542, USA : 1-844-728-6917 : customer-care@bonsaii.com Made in Vietnam...