Troubleshooting - Intimidator GC 1K Owner's Manual

Table of Contents

Advertisement

Troubleshooting 
Symptom
Engine is difficult to
start or will not start
Insufficient engine
power
Engine stops
suddenly
Rough running
engine
 
Cause
Key switch is not in the
proper position
Wiring
Starter switch or solenoid
No fuel, or low fuel
Improper or stale fuel
Water or dirt in fuel
system
Air in the fuel system
Fuel hose or fuel filter
clogged or damaged
Air filter clogged
Defective spark plug
Improper engine oil
viscosity
Weak battery
Brake pedal not engaged
Brake pressure switch
malfunction
Fuse blown
Dead battery
Loose battery/solenoid
connections
Insufficient/dirty fuel
Clogged air cleaner
Cold engine
Cold engine
Insufficient fuel
Fuel pump malfunction
Cold engine
Defective spark plug
Defective high-tension
cord
Defective ignition coil
Clogged/damaged fuel
hose
Improper/stale fuel
Action
Make sure the key is in "ON" position
Clean corroded connections, tighten
loose connections
By-pass switch or solenoid with a
jumper wire. If starter cranks normally,
replace faulty components
Replenish fuel
Replace fuel, consult your dealer
Replace fuel, consult your dealer
Bleed fuel system
Clean/replace fuel lines, consult your
dealer
Clean/replace air filter
Adjust spark plug gap, check spark plug
wire connection, replace spark plug
Change oil to proper viscosity
Clean battery cables/terminals, charge
battery, remove the battery for storage
Apply pressure to brake when starting
Replace brake switch
Replace fuse
Charge/replace battery
Inspect/tighten all connections
Inspect fuel system, replace fuel/fuel
filter
Clean/replace air cleaner
Allow time for engine to warm
Allow time for engine to warm
Replenish fuel
Check wire connections, replace pump
Allow time for engine to warm
Adjust spark plug gap, replace spark
plug
Allow time for engine to warm
Consult your dealer
Clean/replace fuel lines, consult your
dealer
Replace fuel
52 

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GC 1K and is the answer not in the manual?

Questions and answers

Richard Phillips
March 5, 2025

How do I diagnose a p0217 code and fix it

Subscribe to Our Youtube Channel

Table of Contents

Save PDF