Locking Rear Differential; Electric Dump Bed (If Equipped) - Intimidator GC 1K Owner's Manual

To disengage 4wd, press the 4wd dash switch so that the switch light is off. In
some situations, the front differential may remain locked after turning the 4wd
switch off. If this occurs, you may continue to notice increased steering effort and
some vehicle speed restrictions. Perform the following procedure to unlock the
front differential:
1. Stop the vehicle
2. Operate in reverse for at least 10 feet.
3. Shift into a forward gear and drive.
Locking Rear Differential
Danger:
 Steering and vehicle performance will be altered with the rear differential
lock engaged.
 Do not operate faster than 10 mph while on a paved surface. Off-road utility
vehicles are not intended to operate on paved surfaces.
To engage the differential lock, press the emblem side of the switch. The switch
light will turn on, meaning the differential lock is engaged. If one of the rear
wheels should slip, press the switch to turn on the differential lock. Both wheels
with then turn together, increasing traction. When the ignition is turned off, the
rear differential lock is automatically engaged.
Electric Dump Bed (if equipped)
Press and hold the upper end of the rocker switch to dump the cargo bed.
Quickly release the switch when the tilt height has maxed out or the actuator
starts to make a clicking sound. To lower the bed, press and hold the lower end
of the rocker switch. Quickly release the switch when the bed is down or the
actuator starts to make a clicking sound.
Truck Double Actuator
Make sure to fully bottom out the truck electric dump bed each time it is raised.
The actuators will move at slightly different rates and fully bottoming out the bed
will ensure that there is no twisting of the bed which may cause damage.
16